Every structural engineer, corrosion specialist, and fabricator making coating decisions for long life steel structures eventually confronts the same fundamental question: why does a zinc coating continue to protect steel long after it has been scratched, cut, or damaged, when an apparently intact paint or epoxy barrier fails from the inside out? The answer lies in the galvanic series, one …
Continue Reading
For any fabricator, EPC contractor, or galvanizing alternative shop running twin wire arc spray equipment, zinc wire is one of the largest recurring line items on a project budget. Yet a surprising number of metallizing operations never measure how much of that wire actually ends up as usable coating versus how much is lost as overspray, rebound, and oxidation fines. …
Continue Reading
Key Highlights Thermally sprayed zinc creates a continuous conductive layer that attenuates electromagnetic waves through reflection, absorption, and multiple internal reflection mechanisms. Shielding effectiveness (SE) of 40-60 dB is achievable with 100-200 micrometre zinc coatings across 100 MHz to 1 GHz. Arc spray zinc coatings outperform flame spray for EMC applications due to lower porosity and higher coating density. 99.995% …
Continue Reading
Key Highlights Arc spray delivers higher coating quality, lower porosity, and better adhesion than flame spray for zinc and zinc-aluminium wire. Flame spray offers lower equipment cost, simpler setup, and greater suitability for remote or low-volume applications. Deposition efficiency of arc spray (70-85%) is significantly higher than flame spray (50-65%), reducing material waste. Both processes are compatible with zinc wire …
Continue Reading
Key Highlights 3.17mm (1/8 inch) is the dominant zinc wire diameter for both arc spray and flame spray and is compatible with most commercial gun models. Wire diameter directly affects deposition rate, coating surface roughness, and droplet size, all of which influence final coating quality. Equipment compatibility is the primary constraint: always match wire diameter to the gun manufacturer’s specification. …
Continue Reading
Key Highlights Zinc-aluminium wire (ZnAl15) delivers 2-3x the corrosion service life of pure zinc wire in C4-C5 environments per ISO 12944. Pure zinc wire remains the preferred choice for sacrificial galvanic protection of rebar and mild inland exposures. Coating microstructure differs fundamentally: zinc produces a lamellar oxide structure while ZnAl forms a dense mixed oxide passive layer. Both alloys are …
Continue Reading
Key Highlights 99.995% purity (Special High Grade) is the internationally recognised minimum standard for zinc wire used in structural thermal spray corrosion protection. Lead contamination above 0.003% in zinc feedstock creates brittle grain boundary phases that reduce coating cohesive strength and accelerate corrosion. Cadmium, iron, and copper are the other critical impurity elements, each with specific effects on coating microstructure …
Continue Reading
ZnAl wires, or Zinc–Aluminium alloy wires used primarily in thermal spray metallizing have played a decisive yet often understated role in modern corrosion protection. Zinc–aluminium alloy wires address the shortcomings of using only zinc or aluminium coatings, offering better durability when applied in the field. They combine the sacrificial protection of zinc with the barrier and passivation benefits of aluminium, …
Continue Reading
Metallizing, also known as thermal spray coating has played a decisive yet often understated role in extending the service life of industrial assets. Long before corrosion protection became a quantified engineering discipline, metallizing emerged as a practical method to deposit protective metal layers directly onto steel surfaces, translating metallurgical principles into durable, field-applicable solutions. Unlike bulk galvanizing or factory-bound coatings, …
Continue Reading
Key Highlights Tin zinc wire is the standard feedstock for capacitor end metallizing (schoopage) in the electronics manufacturing industry. Sn80Zn20 (80% tin, 20% zinc) is the most widely used alloy composition for capacitor end termination. Tin zinc alloy wire is fully RoHS compliant, making it the preferred lead-free choice for electronics applications. Tin zinc coatings also find use in food …
Continue Reading